Rotary drums are a valuable investment with the potential to have a long productive life with proper maintenance. While protecting this investment is not hard, it does take know-how, and routine maintenance. Luckily, this routine maintenance and knowledge go a long way in recognizing potential problems, and spotting when a rotary drum is in need ...
Holding the appropriate temperature within a rotary kiln is what allows the desired chemical reaction to occur. Sustaining that temperature, however, can be difficult if the right seal is not chosen. Almost all rotary kilns run at a negative pressure, meaning gas doesn’t leak out, but rather, air leaks in. Because rotary kilns are always ...
For various reasons, it is often desirable to increase retention time in the rotary kiln. In order to do this, the loading, or how much material is in the rotary kiln at one time, needs to be increased. This is done by adding what is called a "dam" to the interior of the rotary kiln. ...
Indirect fired rotary kilns are an effective method of processing materials, but sometimes it is necessary to take additional measures to ensure that the rotary kiln is processing efficiently. Indirect fired rotary kilns create heat transfer by conduction through the shell of the rotary kiln, rather than by means of a hot gas stream. Because ...
Once we have our preliminary rotary kiln size, we can start to think about the details of the rotary kiln internals. In the case of a direct fired rotary kiln, in which the hot stream of gas flows directly through the interior of the rotary kiln, refractory is usually needed. Arguably one of the most ...
Another aspect of rotary kiln design is deciding whether to go with a direct fired rotary kiln, or an indirect fired rotary kiln. The difference between the two is how the heat is introduced. In a direct fired rotary kiln, the heat is introduced directly into the internals of the rotary kiln, via a stream ...
Knowing the chemical composition of a material is a valuable asset in rotary kiln design for several reasons. One important reason is that many materials will combust inside the rotary kiln at high temperatures, creating more heat than was put into the rotary kiln. In this case, the rotary kiln needs to be designed to ...
Feeco International has had much success in the thermal processing industry, with their custom designed rotary dryers, rotary kilns, rotary calciners, and rotary coolers. Part of their success is owed to their lab, which has state of the art equipment and highly trained technicians to run tests that assist in determining custom engineered needs. ...
